-40%
Yokogawa 701260 High Voltage Isolation Input Module
Yokogawa 701260 High Voltage Isolation Input Module
Yokogawa 701260 High Voltage Isolation Input Module
Yokogawa 701260 High Voltage Isolation Input Module
Yokogawa 701260 High Voltage Isolation Input Module
Yokogawa 701260 High Voltage Isolation Input Module

Yokogawa 701260 High Voltage Isolation Input Module

$ 475.2

Availability: 100 in stock
  • Brand: Yokogawa
  • All returns accepted: Returns Accepted
  • Condition: Sold As Is
  • Model: Yokogawa 701260
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Item must be returned within: 30 Days
  • Restocking Fee: No

    Description

    Yokogawa 701260 High Voltage Isolation Input Module
    *High-Voltage 100 kS/s 16-Bit Isolation Module (with RMS) (701260) 850 V (DC+AC peak) direct input, RMS mode Accuracy of 0.25%. 2 Channel Input Module for the Yokogawa DL750.
    -Input couplings AC, DC, GND, AC-RMS, DC-RMS
    -Maximum sampling rate 100 kS/s
    -A/D conversion resolution 16 bits (2400 LSB/div)
    -Input type Isolated unbalanced
    -Frequency range (¿3 dB) Waveform measurement mode DC, up to 40 kHz
    -RMS measurement mode DC, 40 Hz to 10 kHz
    -Input range (10:1) 200 mV/div to 2000 V/div (in steps of 1, 2, or 5) (1:1) 20 mV/div to 200 V/div (in steps of 1, 2, or 5)
    -Effective measurement range 20 div (display range 10 div)
    -DC offset ±5 div
    -Maximum input voltage (1 kHz or less) In combination with 700929 Probe (10:1) 1000 V (DC + AC peak)
    -In combination with 701901+701954 (1:1) 850 V (DC + AC peak)
    -Maximum allowable in-phase voltage In combination with 700929 (10:1) H side: 1000 Vrms (CAT II) 4, L side: 400 Vrms (CAT II)
    -In combination with 701901+701954 (1:1) H side: 700 Vrms (CAT II) 7, L side: 400 Vrms (CAT II)
    -Direct input (when using a cable which doesn't comply with the safety standard) H/L sides: 30 Vrms (42 V DC + ACpeak)11
    -DC accuracy (waveform measurement mode) ±(0.25% of 10 div)
    -DC accuracy (RMS measurement mode) ±(1.0% of 10 div)
    -AC accuracy (RMS measurement mode) Sine wave input ±(1.5% of 10 div)
    -Crest factor of 2 or less ±(2.0% of 10 div)
    -Crest factor of 3 or less ±(3.0% of 10 div)
    -Input impedance 1 MW ± 1%, approx. 35 pF
    -Connector type Isolated type BNC connector
    -Input filter OFF, 100 Hz, 1 kHz, 10 kHz
    -Temperature coefficient (waveform measurement mode)
    -Zero point ±(0.02% of 10 div)/°C (typical value)
    -Gain ±(0.02% of 10 div)/°C (typical value)
    -Response time (RMS mode) Rise (0 to 90% of 10 div) 100 ms (typical)
    -Fall (100 to 10% of 10 div) 250 ms (typical)
    -Crest factor (only at RMS measurement) 3 or less
    -Please use 701901 (1:1 safety adapter lead) or 700929 (10:1 safety probe), which complies with the safety standard, for high-voltage input.
    *Remark
    To get the actual shipping cost to your location, please contact us before purchasing.
    The shipping cost will be adjusted to the actual shipping cost.