Goulds 3AVN15HM07 Booster System with Indoor Controller and eHM Pump, 45 GPM Max

Description

Goulds Aquavar e-ABII Variable Speed Constant Pressure System
This AB2 variable speed pump controller and complete booster package provides an economical answer for municipal water district customers with low water pressure. Both domestic and light commercial applications can benefit. As water use increases, the controller changes pump speed to maintain pressure. Large supply tanks are eliminated and less wear and tear on your pump and motor. Think of it as "Cruise Control" for your pump!
Package includes:
Pump, model e-HM, 7 stages
3 HP intelligent controller, NEMA 1, model Aquavar IPC
Transducer, (tank not included)
Aquavar IPC Controller Features
Input power 200V to 240V ±10%, single phase (low input voltage may affect motor operation)
Output power up to 230V three phase (based on input voltage)
Maximum output current is 10.6 amps
Keypad, LCD graphical display
Signal lights when power on, inverter stopped, standby, warning/alarms; auto ON
Over 95% at full load electrical efficiency
Motor protection against ground fault, motor stall, over temperature, condensation, overload
Pump protection against no-flow, under pressure, no water / loss of prime, short-cycle
Ambient temperature is 34° F to 114° F
Maximum humidity is 93% at 114° F, non-condensing
Avoid mounting in areas with excessive dust, acids, corrosives and salts
Indoor, NEMA 1, enclosure
Wall mounted
Convection with cast aluminum heat sink, with temperature fan
Transducer is 4-20 mA power supply, 300 psi range, 16-foot shielded cable
Pump e-HM Features
3 HP, three phase, 208-230/460 volts
Flows up to 45 GPM
Heads up to 250 ft
Close-coupled horizontal multi-stage design with NPT threaded inlet and outlet connections
High-efficiency motor coupled with an innovative hydraulic design allowing less pump for more performance
Built to withstand heavy-duty applications in industry
Made of 316 stainless steel and construction incorporating a 20% increase in the pump body thickness to ensure enhanced durability and reliability
Offers a potential of 30% in energy savings versus the competition
Standard TEFC (IP55) motor enclosure can be paired with Goulds variable speed drives such as Hydrovar
Almost silent, even when it's working at its peak due to high-efficiency hydraulics, motor and thick metal pump body
Applications
Low water pressure applications
Domestic and light commercial applications
Homes with multiple showers/baths
Irrigation
Photo is illustrative and may not reflect the actual product.