DAYTON 45MW80 Booster Pump, 3 HP, 230V AC, 1 Phase, 120 PSI Shut Off, 9 Stages

Description

DAYTON 45MW80 Booster Pump, 3 HP, 230V AC, 1 Phase, 120 PSI Shut Off, 9 Stages
Box is damaged. Pump is unused and undamaged
This Dayton® multistage booster pump increases pressure from city mains, or pumps water from cisterns and private ponds to ensure the proper operation of filtration equipment. Self-priming to 10 ft. when the pump housing and suction line is filled with water and a foot valve is used. The multistage design helps provide steady, quiet, and vibration-free operation. Cast-iron housing is ideal for general service, stainless steel for filtration applications. Features an O-ring casing seal for reliable, high-pressure sealing with easy disassembly for repair or maintenance. Diffusers are glass-filled engineered composite material with a fixed impeller design and high resistance to abrasion and corrosion. Bowls have 300 stainless steel rabbit lock for positive alignment with no gaskets needed.
Technical Specs
Item
Booster Pump
Phase
Single
Pump Housing Material
Cast Iron
Motor Enclosure
Open Dripproof, Open Dripproof (ODP)
Horsepower
3 hp
Nameplate Voltage
230V AC
Flow Rate @ 10 psi
44 gpm
Flow Rate @ 20 psi
43.1 gpm
Flow Rate @ 30 psi
42.5 gpm
Flow Rate @ 40 psi
41.8 gpm
Flow Rate @ 50 psi
39.9 gpm
Flow Rate @ 60 psi
37.9 gpm
Flow Rate @ 70 psi
35 gpm
Flow Rate @ 80 psi
31.1 gpm
Flow Rate @ 90 psi
28 gpm
Flow Rate @ 100 psi
23.9 gpm
Flow Rate @ 120 psi
0 gpm
Shut Off Pressure (Maximum)
120 psi
Compatible Intake Pipe Size
1 in
Compatible Discharge Pipe Size
1 in
Intake Type
NPT
Mounting Orientation
Horizontal
For Use With Potable Systems
No
Amps
14.5 A
Case Pressure (Maximum)
300 psi
Compatible with Media Type
Water
Discharge Type
NPT
Duty Cycle
Continuous
Frequency
60 Hz
Impeller Design
Closed
Impeller Material
Noryl
Includes
Manual
Intake Size
1 in
Manufacturer Warranty Length
1 yr
Maximum Media Temperature
140 Degrees F
Motor Ambient Temperature (Maximum)
149 Degrees F
Motor Ambient Temperature (Minimum)
65 Degrees F
Motor Frame Designation
56J NEMA
Motor Type
Capacitor-Start/Run
Number of Stages
9
Overall Height
8.75 in
Overall Length
32.75 in
Overall Width
6.75 in
Priming
Self-Priming
Pumping Application
Filtration
Maximum RPM
3,450 RPM
Seal Material
Buna-N, Carbon, Ceramic, Stainless Steel
Standards
cULus Listed
Suction Lift (Maximum)
10 ft
Wetted Material
304 Stainless Steel, Buna-N, Carbon, Cast Iron, Ceramic, Noryl, Nylon, Polycarbonate