3D Printed Lens Adapter Big/Tall Nose Version for Oculus Quest 2

Description

3D Printed Prescription Lens Adapters
Big/Tall Nose Version
for
Oculus Quest 2 DIY package
. You can swap the adapters easily for different prescription lens or take out the adapters for people who don't need the prescription lens.The design of adapters allows the lens of high degree of myopia (successful testing on degrees of -12.75 and -11.75) since it has an open end.
At the same time, the cuts on the Lens Adapters and Bases won't touch or press on your Tall and/or Big Nose
. Overall it is around to get a glasses from Zenni with regular lens and the total cost will be cheaper than those from the most online retailers.
You will need to order the glasses with lenses from
Zenni # 550021. (https://www.zennioptical.com/p/metal-alloy-full-rim-frame-with-spring-hinges/5500?skuId=550021
). Just enter your prescription with one number of IPD
65mm
. High index and anti-glare coating are highly recommended your degrees are high. It will take about 3 weeks to get your glasses. Before taking down the lens,
use blue painting tape or marker to mark the vertical orientation (up and down) and to mark the left/right lens of the glasses
. Insert the lens with the corresponding orientation into the left and right Lens Adapters and install the bases on the Quest 2 (after taking down the facial interface) on the Quest 2. Then you can put the adapters on the top of the bases or take them out easily.
The bases are printed with
PETG
which are stronger and more flexible than PLA. One
pair of Lens Adapters (printed by PETG)
are provided. The whole installation should take about 2 minutes. Because the Lens Adapters have open cuts, the lens will be very easy to insert and a little loose. But they are hold well enough for any game play. If there are any issues with the installation, I will provide support based on my personal experience.
The lens and Quest 2 in the pictures are not included. What you will get are a pair of bases and one pairs of Lens Adapters.
The design of these adapters is credited to kizinfo on Thingiverse 4073076 with my remix to make the bases deeper. The distance between the prescriptions lens and Quest lens was increased to be 2mm more compared to the original design and that will allow thicker prescription lens.